修复你的物品 社区 商店

发售于2017年11月3日。型号为 A1865, A1901。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供银色和深空灰色。（读音与“iPhone 10”相同）

1199 个问题 查看全部

更多选项

iPhone x keeps restarting even after taking it apart

Hi there

Today I had changed the back housing. After that the iphone starts to restarts every 3 minutes and noticed that there is heat below the camera, which obviously the motherboard.

I disassemble everything for testing, I just used the power button and the 3 LCD cables. But still keeps restarting. I come into the conclusion that it must be the motherboard.

Did I miss something here? I had reset the phone but didn’t fix the issue. I could not update the iphone to the latest update which was released last week I think due to the phone keeps restarting and didn’t let me update it.

Thank you for your support

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 4
添加一条评论

5个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

It’s either a component knocked off near one of the logic board connectors or one or more pads are ripped between the two boards that are sandwiched together that make up the iPhone X board.

Note that the pads being ripped between the board are common to occur when the phone has been dropped pretty hard.

这个答案有帮助吗？

是 否
得分 5

1条评论:

Thank you for your help.

The phone was working before I open it. Once I replace the housing, the issue occurs.

由完成的

添加一条评论

更多选项

This sounds like your *most likely* problem is that your battery is damaged or not connected well. iPhones will restart or boot loop if they are missing battery input. I’m ignoring the heat aspect of your presentation—if a new battery well connected with no damage to the battery connector (check under magnification) then I would focus on the heat you found.

这个答案有帮助吗？

是 否
得分 5

2条评论:

I have that same problem and battery is perfect and connection is good. I swap everything back to old housing and phone stop reboot. So where is problem? New housing do that issiu. But where?

由完成的

Thermal sensor on the charge port would be the next most likely

由完成的

添加一条评论

更多选项

I had the exact same issue. Phone kept restarting after I put the logic board in a new back housing. Once I put the original charging port and taptic engine flex cables into the new back housing the phone worked fine. No more restarting. I am glad I found this thread because I thought it was logic board issues which would have been a lot more expensive.

这个答案有帮助吗？

是 否
得分 2

2条评论:

Thank you!!! Working!!!

由完成的

The same is true for the iPhone SE 2020

由完成的

添加一条评论

更多选项

I have that same problem. When I swap to old housing phone start work normal. I don't know way in new star rebooting

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

Overheating makes the upper and lower layer pad not connected properly or shorting cause that issues.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Fahad Alotaibi 将永远感激不已
浏览统计数据:

过去 24 小时： 2

过去 7 天： 8

过去 30 天： 25

总计 2,756