声誉积分: 79
5
2
Hi
i bought a bent iPhone 6 off eBay. I completely disassembled it to un-bend it. I fixed the bend but when I was putting the logic board back in I realised that the top part of it was stuck over a piece of plastic, which had bent it. I removed it again and tried to bend it back but it snapped off. Could somebody tell me if the logic board will still work?
i have attached pictures to show the damage
声誉积分: 221.4千
15
289
807
As @pollytintop suggests, the best way to find out is to install it. However, I have looked at the circuit board with ZXW Tools and the only copper trace that runs in that area is for a Test Point. So you should have no issues running the phone properly despite this issue.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 68
3条评论
there's no picture..
由 pollytintop 完成的
Sorry they’re there now
由 Shay Mitchell 完成的
should be fine.. I don't think that tiny part has a great significance apart from securing to the housing. I'd try installing it again, it's the only way to find out!
由 pollytintop 完成的