跳转到主内容

Black and Decker TO3250XSB Convection Oven Repair, removing clips

How do you get the clips off of this device to completely remove the cover? I’ve followed all steps and removed all the necessary screws but cannot reach the clips to fully remove the cover. Any suggestions?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

最有帮助的答案

I’m not familiar with this particular model but all of the similar appliances I have worked on usually have a cover that wraps around on three sides. After removing all of the cover screws, slide the cover towards the rear of the oven for about half an inch. The cover should then lift away from the main body. Hope this works for you.

这个答案有帮助吗?

得分 1

2条评论:

Thank you for your reply but this model has side clips that need to be squeezed and slide though a slot in the cover to take it off. The problem is that the clips are on the front of the unit and welded to the face of the unit. I can't get my hand deep enough into the unit to squeeze the clip and slide it through the slot. I was hoping for a trick that would work.

完成的

Please post a couple of photos. Here's how 在已经存在的问题里加入图片

完成的

添加一条评论

添加你的答案

Lari 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 7

总计 511