Can this destroyed pcb be fixed?

Question

PlayStation 4

索尼的新一代电视游戏机，于2013年2月20日发布，并于2013年11月15日开售。

1696 个问题查看全部

Ted Fagerholm @breze

声誉积分: 1

发帖于: 2018年11月13日

更多选项

Can this destroyed pcb be fixed?

I don't know, and neither do I want to know what and how the previous owner treated this ps4…

What I know:

-The broken hdmi port has been removed with a drill because they couldn't get the solder to melt…….

-The drill has slipped and hit 2 of the lanes going to the port

-The port has been ripped off taking some pads with it.

I know that soldering a new hdmi port there isn't a problem, but I'm not sure if there is anything that could've been damaged where the holes have been drilled, as the PCB is multilayered.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

arbaman @arbaman

声誉积分: 102.6千

10

54

291

发帖于: 2018年11月13日

更多选项

That looks very awful..if it was a very valuable board I’d look into schematics to get a clue on where to get traces and make jumpers but from a purely economical prospective I’d say it’s not worth the time and money at a glance..just my 2 cents..

这个答案有帮助吗？

是否

得分 1

添加一条评论

Sohorca Adrian @fixdontthroawy 声誉积分: 37 2 · Answer 1 · 2019-05-26T10:59:07-07:00

最有帮助的答案

Sohorca Adrian @fixdontthroawy

声誉积分: 37

2

发帖于: 2019年5月26日

更多选项

Hi .

In my opinion this is fixable … but not as you expected.

In order to have a viable fix in order to use this PS4, you shoul get a HDMI cable ( a cheap one ) but one that has a male an female conector.

The idea is to solder the wires from the HDMI cable directly onto the board - use the end with the female connector.

You cut the cable in half splice it open and with a voltmeter using the continuity test to see wich wire goes to wich pin .

After you solder each wire to the respective pin i woul use the hot glue gun to set everything in place

这个答案有帮助吗？

是否

得分 2

添加一条评论

PlayStation 4

Can this destroyed pcb be fixed?

2个答案

添加你的答案