修复你的物品 社区 商店

索尼的新一代电视游戏机，于2013年2月20日发布，并于2013年11月15日开售。

1700 个问题 查看全部

更多选项

Beeps only when eject button is pushed and wont power on

Model: 1215A

I’m having a major problem where you can press the power button all day and nothing will happen. No lights or beeps or nothing, but once you press the eject button, it’ll beep once but doesn’t light up… Now here’s the kicker…. I have to spam the eject button at least 4 times before I get the blue light to pop on only for a second and dies. After it dies, I can press the power button 4-5 times and get a beep and the last press of the power button, the blue light pops on for a second but dies again and I have to go back to smashing the crap out of the eject button before i can press the power button yet again.

I’ve already tried a couple of different tricks like pulling the cover off and cleaning off the top of the system. Heck, I pulled the power supply out of the system and cleaned it completely. Before I pulled the power unit out of the PS4, it would only beep once and i wouldn’t get a reaction out of it until i unplugged the power cord from the back and plugged it back in.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 3
1条评论

Mine does that everytime I leave it unplugged for a day or more and I take a blow dryer and warm it up and then mine powers on everytime

由完成的

添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Since you can only power the console for a moment (1 second) it sounds like the power supply has gone bad rather than loose solder joints under the APU (processor chip) as explained below:

Try this fix if a replacement power supply does not work, if it works you’ll know whether or not the APU (main processor chip) on the board has loose solder joints to the board or not.

PS4开机瞬间关机的修复方法

If that does work, it’ll fix the problem temporarily but it will happen a few weeks or more later. For a long term fix the APU needs to be reflowed properly or even better reballed from a reputable console repair shop.

Loose solder joints under the APU occurs from dropping the console or the console overheating due to dust build up.

Refer to this guide on power supply replacement:

更换PS4的电源供应

Note: To order the right power supply, take the power supply out of your system and note the part model number engraved / printed on the power supply unit itself.

Image of where power supply model number is for example:

https://da2lh5cs8ikqj.cloudfront.net/car...

PlayStation 4 电源供应图片

指南

更换PS4的电源供应

难度：

中等

—

30 minutes - 1 hour
PlayStation 4图片

指南

PS4开机瞬间关机的修复方法

难度：

简单

—

10 minutes

这个答案有帮助吗？

是 否
得分 2

2条评论:

I actually got it to power back on after two days of messing with it. Turns out it was the power supply. I pulled it out yet again and actually went into detail of taking it apart and putting it back together and sure enough boom. Powered on and hasn't gave me a problem yet. But I'm still probably going to buy a replacement power supply for it to be safe.

由完成的

I'm having the same problem except now ive purchased 2 power supplies, one was the wrong one... and the 2nd is installed but doing the exact same thing. Blue light every other time you try to power up, then gm shuts right back down. I've tried hitting it on my knee, tried it on its side, and the price to reball... with? Any suggestions?

由完成的

添加一条评论

更多选项

When leaving my PS4 at home in my room as I left for university, I thought it would be safe. I came back a few days ago and I wanted to play some FIFA or Horizon, I plugged everything in correctly, when I pushed the power button no sound came out but the eject but made 2 quick beeps.

I hit the eject button multiple times buts still 2 beeps and nothing for the power button, I was gonna for 3 months, what must I do

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

The Shadow`Moto 将永远感激不已
浏览统计数据:

过去 24 小时： 16

过去 7 天： 60

过去 30 天： 263

总计 35,609