已解决： Is there a guide for replacing iPad Pro 12.9" battery? - iPad Pro 12.9"

Is there a guide for replacing iPad Pro 12.9" battery?

ive used the iphone 6 plus battery replacement guide and replaced the battery on my phone a few times.

I had a first generation ipad pro 12.9inch, and im interested in replacing the battery for it, but when i did a search, i didn’t see any guides for ipad pro battery replacement.

I know there are tear downs and also guide for replacing the ipad pro screens, home buttons etc.

Does anyone know of a good guide i could watch that walks me through how i could replace the battery on my ipad pro 12.9 inch? I was wondering if the reason there isn’t one for the ipad pro is because the technique is similar to standard ipad battery replacement?

Thanks in advance for any help :)

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 4

发帖于: 2018年11月4日

更多选项

Sorry no guide, but you really don’t need one! The teardown guide will give you enough info to figure things out iPad Pro 12.9" Teardown. Here’s the needed steps:

Step5 & 6 - Removing the display

Step9 - Remove plate, disconnect iSight camera from logic board.

Step10 - Remove shield

Step11 - Just disconnect ribbon cable from logic board

Step12 - Just disconnect speakers form logic board

Step14 - Disconnect antenna cables from logic board and carefully lift them past the edge of the batteries and the remove the two clips

Step15 - Disconnect the other two speakers and the last ribbon cable to the switches, then lift the logic board up and out.

Step18 - Carefully heat the backside of the case to soften the pull tapes adhesive using a hair dryer or heat gun on low. Using a pair of forceps like this one: Debakey Lung Forceps as they allow you to pull the tapes more effectively as you don’t want to tear them as you pull.

这个答案有帮助吗？

是否

得分 5

2条评论:

what @danj says.

由 pollytintop 完成的 2018年11月4日

Thanks so much!! :)

由 thuaners 完成的 2018年11月4日

添加一条评论

iPad Pro 12.9"

Is there a guide for replacing iPad Pro 12.9" battery?

1个答案

添加你的答案