PowerStation model PSX3 has both tire inflator and jump starter functions. It also has a work light. The inflator had been working fine, but now the push button switch has no effect. Seems as if an electrical connection has been broken. The work light functions perfectly, so there is power available. Inspection of the interior wiring didn’t reveal anything obvious.
声誉积分: 782.4千
1.1千
893
2.3千
david barkman it sounds like a bad switch (mechanical failure). If you can disassemble it, check the switch and you could always try to replace it. We would need to see what it all looks like in order to give you more details. You can always post some pictures so that we can possibly provide you with a more precise answer. 在已经存在的问题里加入图片
这个答案有帮助吗？
Everything works on mine except it doesn’t seem to charge. Light works and compressor works .
Have stripped it down and found a capacitor and resistor burnt out. Can see the capacitor values but there is no way of reading the resistor value. Any idea where I could get a circuit diagram please?
Thanks
过去 24 小时： 0
过去 7 天： 11
过去 30 天： 31
总计 1,678
1条评论
my PSX3 compressor has started to run very slowly put-put-put...can that be fixed?
由 Michael Modest 完成的