声誉积分: 13
1
My xl bravos power washer stops on the spin cycle and stays stuck on 14 for several minutes. Water drains out. It trys to spin but only moves a little. And then the sd code comes on before this happened i would get the ul code but could get it to work .
声誉积分: 689.2千
3.7千
1.1千
2.6千
This fix has done it for others that have had this problem:
这个答案有帮助吗？
声誉积分: 27.6千
113
53
64
The code name “SD” is telling you there is too much suds in the washer, therefore it cannot operate due to that. Try a different soap that suds less and report back.
To address the uL code too, have a look at this article here. I cannot really help you beyond this point if this article does not help.
这个答案有帮助吗？
I tried not using any soap and it still happened
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 11
总计 105
1条评论
Tried it worked and went back to doing the same thing
由 Rice 完成的