已解决： What to do with tape on replacement digitizer? - iPad Mini 3 Wi-Fi

What to do with tape on replacement digitizer?

I’m replacing the front panel on my son’s iPad mini 3. After disassembly and cleaning up all the shards of broken glass, I am ready to reassemble using the replacement part I ordered from ifixit.

I’m at the point of plugging the new digitizer board in, but the board is wrapped with black tape. The original digitizer board was not. So is this just protection for shipping that needs to be removed for installation, or should I leave the tape on the digitizer board?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

发帖于: 2018年5月16日

更多选项

By "black tape" do you mean a peel-off adhesive, because the digitizer board is supposed to be attached to the rear case (see Steps 46-47 in the below guide where the digitizer is removed from the back case), and iFixit typically includes an adhesive pre-installed on the parts for your to "peel-off" for reattachment. Now, if you mean "wrapped" as in wrapped around front and back, then this isn't normal.

iPad Mini 3 LTE Front Panel Replacement

这个答案有帮助吗？

是否

得分 0

1条评论:

I was using the WiFi model guide..... well because I have a WiFi model, but the LTE guide you linked to actually has more detail on it that actually matches what I'm seeing better. Thank for pointing it out.

由 James Alley 完成的 2018年5月16日

添加一条评论

iPad Mini 3 Wi-Fi

What to do with tape on replacement digitizer?

1个答案

添加你的答案