声誉积分: 1
1
I've had the PSU rebuilt. Replaced the battery. Changed the hard drive. Replaced the optical drives. Changed the video card. replaced the memory. Tried holding down the PMU and the on button for 15 seconds, no good. Pulled all the cables and held the on button for at least 15 or more seconds, still no good. What's left besides R&Ring the motherboard and or the daughter board?
声誉积分: 685.3千
3.4千
1.1千
2.6千
Have you pressed the CUDA button on the logic board?
这个答案有帮助吗？
Where’s the CUDA? There only one button that I can see.
声誉积分: 26.4千
113
52
62
@alm1ghty55 The CUDA button is labeled S4 in the image I provided below. Look near the bottom left corner of the image. Hopefully this helps.
这个答案有帮助吗？
Your motherboard graphic is not my board 4X AGP Video slot is my board not PCI Video Slot.
Your motherboard graphic is not my board 4X AGP Video slot is my board not PCI Video Slot.
Also when I boot the keyboard caps lock doesn't light.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 2
总计 148
3条评论
The button your refering to is called PMU and yes I've pressed it many times. I've learned from past experience with other Mac's by holding the PMU button and the start button for fithteen seconds or more would solve the problem. Not in this case.
由 David Kievman 完成的
The board your refering to is not my board. I have a G4 MDD 1.25 GHZ Single CPU.
由 David Kievman 完成的
Just replaced the motherboard. The original had a broken capacitor. Also The PSU was dead so I R&R'd it. boots but has the original problem. How do I know if the CPU is bad?
由 David Kievman 完成的