修复你的物品 社区 商店

发售于2017年11月3日。型号为 A1865, A1901。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供银色和深空灰色。（读音与“iPhone 10”相同）

1199 个问题 查看全部

更多选项

iPhone X rear glass replacment

Hi guys,

I want to know If anyone has replaced iPhone X rear cover glass, I know its replaceable but I'd like to get some more details on this repair, will it look so obvious to tell it has been replaced after replacement?

I've watched the repair on an iPhone 8, is it similar? and what to avoid?

Are there any recommend suppliers to buy a glass cover from?

Which method is better and safer, taking the board out and prying the rear cover?

Any recommendation would be appreciated.

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 17
添加一条评论

10个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

I replaced mine and honestly, the hardest part was finding a quality replacement part and that says a lot considering how hard it is to get the original back off.

The issue with removing the back glass is that Apple uses some sort of top shelf glue that requires either freezing cold temperatures or high heat to break the bond.

Theres a couple videos on youtube showing the use of a heat gun or dry ice to break the bond but that only gets it to the point of possible.

Without heat, you’d be scraping little chips off of the back for hours and hours. Total time to remove the back glass for me was around 30-45 minutes with heat.

Also, be aware that the camera cover is welded onto the frame and must come off in order to get the back glass on then the cover must be glued back down.

这个答案有帮助吗？

是 否
得分 8

2条评论:

The feasible and good way to get it done is to replace the housing which comes with the back glass. Expensive to get good ones but this is the way to go.

由完成的

Can you place a new back glass on top without removing the broken one?

由完成的

添加一条评论

更多选项

Don't try this, it's beyond insane.

The glass is fused onto the frame with strong adhesive, it is very easy to ruin the frame and even after best attempt, it still looks pretty obvious.

这个答案有帮助吗？

是 否
得分 6

3条评论:

Thanks for your reply, I wanted to try it as I found on sale which has broken rear glass cover and thought I do try it but anyways thanks

由完成的

Took me over 6 hours to get rid of the broken glass!

由完成的

I agree! Chipping way the glass with nothing but a heat gun is insane! More likely to damage the frame either from heat or bending it in the process of prying the chips out.

For someone doing just one phone or even a few a month its just cheaper replacing the the case back.

由完成的

添加一条评论

更多选项

I would highly recommend you do a full housing replacement. The glue that holds the glass on is extremely difficult to remove. You'll be chipping away at the glass for hours and probably ruin the frame.

这个答案有帮助吗？

是 否
得分 3

2条评论:

I watched a video of Rewa company on YouTube and they came up with a amazing method, thanks man for your reply

由完成的

I just checked with my sales rep from Rewa about the cost of the chemical they use. Their MOQ is 200ml which costs $148.88. Shipping to the US is $107. I can get the full housing for much less.

由完成的

添加一条评论

更多选项

It is hard to replace and may cost you much money. Maybe you can buy a back housing case to protect your phone.

这个答案有帮助吗？

是 否
得分 2
添加一条评论

更多选项

Another alternative is that some Chinese and no doubt US suppliers (at a much higher price) are offering a new case that is preassembled and is fitted with almost all of the required flex cables (the one I got didn’t have a bluetooth cable so I used the old one), Taptic Engine, speaker, Lightning Port and all the switches.

You need to transfer the logic board from your old phone obviously and both front and rear facing cameras camera’s. The one I got from China cost me about $67 and it works fine.

这个答案有帮助吗？

是 否
得分 0

5条评论:

Can you share a link to where you got the part from?

由完成的

Can you please share the link please

由完成的

Here you go kids, sorry for the delay in responding. https://www.sunsky-online.com/view/93108...

由完成的

Can you say something about the quality and durability of your case ? I am considering buying one... Thanks :)

由完成的

The quality of the case and spare parts is pretty good and so far nothing has failed since the phone was re-assembled. For $67 its definitely worth a shot. If you buy one please report back here about your experience.

由完成的

添加一条评论

更多选项

It is possible to remove the glass from the rear of an iPhone X. I have done hundreds of them. The adhesive he talks about doesn't break down using the kind of amateur heat tools that most repair businesses might have.

The adhesive does break down at a much higher temperature which can be a problem to the internals of the phone. To remove the glass you have to apply very high temperatures for limited periods of time, just enough to release the adhesive but not enough to dissipate through the phones frame, this is why you see the emergence of laser machines that can apply that blast of heat directly to the adhesive layer.

It can also be achieved by a hot air gun, a small very directional hot air station can work too with some experience.

这个答案有帮助吗？

是 否
得分 0

3条评论:

Hey guys!

No need to get rude for anyone!

Everyone can deicide for him-/herself what is possible or not.

Video for this maintenance is found here:

https://www.youtube.com/watch?v=T4ofYJ5y...

Possible, but tough procedure though.

由完成的

Just because it can be done doesn't mean its a smart repair! Someone who has time on their hands might give it a try but it does take skill as being rough will damage the frame and you still need to find the special glass panels as the lens cover sits on top of the original glass.

If you are replacing tons of backs I would get a laser to burn the adhesive as being a better solution iPhone Back Glass Separating with Laser Machine

由完成的

Right, buying a laser machine or cryo stuff only makes sense when you are doing probably hundreds of them. This is obviously not a DIY repair, so if you need to ask how to do it, chances are you are just an average users and spending more than the cost of a few iPhones to buy equipment just to repair one device is insane.

由完成的

添加一条评论

更多选项

From a repair shop perspective, don’t attempt this repair if you’re a DIYer. I’m all for people attempting their own repairs but there are two methods to repairing the back glass. Either source an OEM frame with small parts and a battery from a donor device and transfer the board, screen, and face ID components or buy a $3,000 laser machine.

This is one of those repairs you should leave to a reputable repair shop as it is very difficult and you can mess up your device quite easily.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

have anyone tried this:

https://www.aliexpress.com/item/40005776...

?

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

Maybe a stupid question, but is there any technical reason why Apple couldn’t have used the typical heat release glue that can be freed at reasonable temperatures instead of this (essentially) permanent cement?

这个答案有帮助吗？

是 否
得分 0

1条评论:

Apple has absolutely no argument for separating it, and allowing it to be separable will compromise device reliability, separable adhesive fails easier.

由完成的

添加一条评论

更多选项

laser machine is required to fix this kind of work you can watch the ifixit article here , usually at local market ``iphone x back glass replacement`` will cost you 40$

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Jaffar Almousa 将永远感激不已
浏览统计数据:

过去 24 小时： 5

过去 7 天： 46

过去 30 天： 165

总计 166,365