Hard drive cable socket on logic board broken

Question

MacBook Pro 15" Unibody Late 2011

Released October 24, 2011 / 2.2, 2.4, or 2.5 GHz Quad-core Intel Core i7 Processor

406 个问题查看全部

Patrick Patrick @helloiampatrick

声誉积分: 1

发帖于: 2018年4月10日

更多选项

Hard drive cable socket on logic board broken

Must have happened when I disconnected the old cable, but really didn't notice anything when it happened. I ordered a new SATA cable and sadly, its socket on the logic board is missing the thin plastic edges which would snap the new cable's firmly in place. Now it's completely flat so there's nothing for the connector end to grip onto. I doubt there is a fix for this, other than get a new logic board or suck it up and get a new/older MBP...

It's a late 2011 15", great machine overall, but not sure if it's worth it at this point to invest more money into it, after fitting it with a 1 TB SSD and boosting its RAM to 16GB just a few months ago, now this.

Any thoughts/advice?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

arbaman @arbaman

声誉积分: 102.6千

10

54

291

发帖于: 2018年4月10日

更多选项

For someone with good soldering skills it would be a pretty straightforward repair, demanding but absolutely feasible. Forget about logic board replacement and concentrate on finding somebody who can do the job without sending the board half the world around :) Depending on your location, you're likely to find someone up to the task right here around..

这个答案有帮助吗？

是否

得分 1

3条评论:

Thanks for the advice, but the problem is the little plastic ledge surrounding the connector has disappeared, sorry I didn’t clarify that detail, it’s gone, it broke and flew off somewhere when I disconnected the old cable. So that connector square on the logic board is now completely flat, I would still need to get that tiny little part reassembled for the cable up wedge into.

由 Patrick Patrick 完成的 2018年4月11日

The connector on the bard is just one part, made of plastic and copper. Whoever can solder the new connector will take care to remove it from a used board and replace your missing part. All of us doing such repairs have a pile of dead boards to dig from ;)

By the way, to continue a conversation is much better to add a comment to the answer you received rather than answering yourself anew :)

由 arbaman 完成的 2018年4月11日

How did this go guys? I’m in the same boat - though I have the hard drive cable connector as it’s still connected to the cable. I have an entry level solder kit - should I give it a shot and fix myself? Anyone have any good link tips…?

由 Daniel Oduntan 完成的 2020年3月30日

添加一条评论

Thanks for the advice, but the problem is the little plastic ledge surrounding the connector has disappeared, sorry I didn’t clarify that detail, it’s gone, it broke and flew off somewhere when I disconnected the old cable. So that connector square on the logic board is now completely flat, I would still need to get that tiny little part reassembled for the cable up wedge into. — Patrick Patrick
The connector on the bard is just one part, made of plastic and copper. Whoever can solder the new connector will take care to remove it from a used board and replace your missing part. All of us doing such repairs have a pile of dead boards to dig from ;)

By the way, to continue a conversation is much better to add a comment to the answer you received rather than answering yourself anew :) — arbaman
How did this go guys? I’m in the same boat - though I have the hard drive cable connector as it’s still connected to the cable. I have an entry level solder kit - should I give it a shot and fix myself? Anyone have any good link tips…? — Daniel Oduntan

MacBook Pro 15" Unibody Late 2011

Hard drive cable socket on logic board broken

1个答案

添加你的答案