声誉积分: 11
1
声誉积分: 497.7千
35
339
975
Hold that thought!
Review your system this FireCuda drive is a fixed SATA III (6.0 Gb/s) drive. Depending on your exact system you may have a SATA II (3.0 Gb/s) interface in your system (Core 2 Duo and i5) or have a SATA III (6.0 Gb/s) on the very last series of 17" models (i7).
The older Seagate SSHD drive was auto sense which would work across either SATA II & SATA III systems.
这个答案有帮助吗？
Idk @danj , I have the same HDD in my Dell's optical drive bay that only supports SATA I and other than it being really slow it works well.
Thats the older model not this one! Review the spec sheets:
Note the SATA interface line differences! If you really have a SATA I (1.5 Gb/s) system then you have the still older model.
Many of us were caught off guard when they redid the drive as the 3.5" FireCuda is an Auto sense drive: FireCuda 3.5" SSHD
Oops! Now, that is a thought!
I'm not sure how to check but I'll have a look and find out, Many thanks for the warning Dan, much appreciated.
The easiest way to verify your system is to plug your systems S/N into this web site: EveryMac - Lookup then check the drive section.
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 2
总计 297
1条评论
Many thanks Alex.
由 Craig 完成的