修复你的物品 社区 商店
加入维修社区 - 创建账户

2.3GHz, 2.6GHz, or 2.7GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.7GHz) with 6MB shared L3 cache.

20 个问题 查看全部 | 38配件 购买

更多选项

Component Identity required please!

My macbook retina won't turn on...

I tried to reset NVRAM and SMC but nothing.

I tried to replace the battery but still nothing.

when the mac is charging, the entire logic board is cold except the component in the red box.

Block Image

I believe it is inductor (R36 219 CCF ) , I have not been able to find more information and I do not know where to find the replacement.

can anyone help me?

I think it may be a problem for that component.

I accept any other suggestions to fix my problem and turn my macbook back on. ;)

tnx

jack

update

component L7520

Block Image
已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
1条评论

@oldturkey03 - any ideas on getting the part?

由完成的

添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

The inductor won't be the reason why it is turning on; you can see MacBooks with rusted inductor casings and they will still not need replacing. Measure voltage on both sides of this inductor, it is simply passing voltage through it. If you get voltage one side and not the other, then there is an issue.

If you are getting no volts on both side, the CPU is not turning on, since this is one of the voltages required to power the CPU. This component has no pathway to ground, but it may have 15ohms+ resistance to ground, since the CPU has a low resistance to ground. If it has a dead short, then the CPU is probably dead.

If you are confident in replacing the soldered components on the logic board, find the board number (bottom left of logic board) and Google for schematics and a board view for that, and I can guide you. If you have never done this before, and have no intention of potentially making the issue worse, take it to a 3rd party repair company who specialises in logic board repairs and they will check this out.

这个答案有帮助吗？

是 否
得分 4

2条评论:

Thank you for the reply!

At this time I can not do the measurements, as soon as possible I communicate the results.

with reference to the diagrams:

http://appleschematic.com/apple-macbook-...

http://appleschematic.com/apple-macbook-...

the inductor is the L7520 (page 66 in the pdf, arrow in the image on "original question"), are there other components that I can check?

the inductor's characteristics are: 0.36UH 20% 36A 0.00108OHM but i'm not likely to find it, any suggestion?

由完成的

Without being able to take measurements I can't direct you; we would both be guessing. The inductor is going to be working fine. If this was bad, the fan would spin but it wouldn't actually chime and boot (which happens when the CPU is not being told to turn on, but everything else is).

Inspect the board carefully, get a multimeter and check the power rails on the power aliases page of the schematic (G3H, S5, S4, S3, and S0, in that order)

由完成的

添加一条评论

更多选项

I’m not sure if the inductor is the root issue here. This maybe more a signpost (symptom) of your power issues.

I would review the schematics and trace out the power rails to see what is not getting power and see why this inductor is getting to much current (short to ground?)

这个答案有帮助吗？

是 否
得分 2

2条评论:

"(short to ground?)"?

由完成的

I’m guessing!

You’ll need to trace it out. Inductors tend not to get high current (cause of the heat) which is why it’s possible it’s pathway has a short to ground.

由完成的

添加一条评论

添加你的答案

Jack_T 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 307