已解决： After a water immersion the LCD screen doesn't work - Sony Xperia Z5

After a water immersion the LCD screen doesn't work

First of all sorry for my bad english...

I put four hours ago my z5 in some water, it was not the first time, after a few minutes the screen died, but the rest of the Phone properly works! The notification Light blink, the touch give vibration feedback, the charging work, all it's working except the LCD screen.

What you suggest to do?

Thanks a lot

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

发帖于: 2017年6月17日

更多选项

@fittone, Federico, Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phone. You really should take care of the corrosion that is happening inside the phone from the water damage as that could be your problem. A tear down link for your device Link #1, disassembly guide will enable you to get inside the phone to remove the damage/corrosion caused by the liquid. Use the 2nd link as a guide/instruction on how to clean/repair the device from liquid damage. After this you will be able to power on the phone and see if further damage has to be addressed. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

索尼Xperia Z5拆解

Electronics Water Damage

这个答案有帮助吗？

是否

得分 4

2条评论:

Ehy thanks L Pfaff! I hope to do this asap, but my Phone doesn't was IP certifing for immersions?

由 Federico Fiorentini 完成的 2017年6月17日

Don't rely on it as the LCD got liquid damaged.

由 Ben 完成的 2017年6月17日

添加一条评论