After installing dual SSD it does not turn off

Question

iMac Intel 21.5" EMC 2428 Mid 2011

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

20 个问题查看全部 | 39配件购买

Henry Char @estudiocaribe

声誉积分: 11

发帖于: 2017年4月11日

更多选项

After installing dual SSD it does not turn off

I installed a secondary Crucial 525 GB SSD with your "iMac Intel 21.5" Mid 2011 Dual Hard Drive Kit"

I did a restore of Time Machine backup onto the new SSD, and made the SSD the boot disk. Now, when I try to turn off the computer, it does all the shutting down show, the screen becomes black, but it does not end the process. Nonetheless the peripherials get disconnected, but if I try to turn on the computer again, it does not turn on. I have to push the on/off button for a while in order for the computer to actually turn off, and then it is possible to turn it on.

The same happens when I leave the computer idle for a while, It enters into that same state it goes when turned off, but not off completely. So every time a want to use the computer when idle for a while, I have to press the on/off button for some seconds, and then start the computer again.

Please help..!!

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

mayer @mayer

声誉积分: 689.2千

3.7千

1.1千

2.6千

发帖于: 2017年4月11日

更多选项

Did you format the drive GUID & Mac OS Extended before using the Time machine restore?

这个答案有帮助吗？

是否

得分 3

6条评论:

Also did you alter the Startup Disk control panel setting?

由 DanJ 完成的 2017年4月11日

@danj You mentioned something in another question about there no longer being a BUS speed difference. Is that right?

由 mayer 完成的 2017年4月11日

@mayer - Are you talking about the SATA port's speed? The '11 models have Three - SATA III (6.0 Gb/s) connections (HD, optical drive & spare). The older '09 (2 ports) & '10 (3 ports on most) models have SATA II (3.0 Gb/s) and the '08 models are the last with a PATA (ATA-100) optical port and one SATA III (3.0 Gb/s).

由 DanJ 完成的 2017年4月11日

@danj I was referring to the BUS speed of the optical drive port.

由 mayer 完成的 2017年4月12日

@mayer - The optical drive its self I think is only a SATA II unit.

由 DanJ 完成的 2017年4月12日

显示更多的1条评论

添加一条评论

@danj You mentioned something in another question about there no longer being a BUS speed difference. Is that right? — mayer
@mayer - Are you talking about the SATA port's speed? The '11 models have Three - SATA III (6.0 Gb/s) connections (HD, optical drive & spare). The older '09 (2 ports) & '10 (3 ports on most) models have SATA II (3.0 Gb/s) and the '08 models are the last with a PATA (ATA-100) optical port and one SATA III (3.0 Gb/s). — DanJ
@danj I was referring to the BUS speed of the optical drive port. — mayer
@mayer - The optical drive its self I think is only a SATA II unit. — DanJ

Henry Char @estudiocaribe 声誉积分: 11 · Answer 1 · 2017-04-11T15:55:42-07:00

Henry Char @estudiocaribe

声誉积分: 11

发帖于: 2017年4月11日

更多选项

Yes, I did format it as you say, and I selected the new SSD as the startup disk.

这个答案有帮助吗？

是否

得分 0

添加一条评论

iMac Intel 21.5" EMC 2428 Mid 2011

After installing dual SSD it does not turn off

2个答案

添加你的答案