Computer randomly shutting down following RAM and Sierra upgrade

Question

iMac Intel 21.5" EMC 2389

Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

342 个问题查看全部

Aaron Peterson @redbird74

声誉积分: 13

2

发帖于: 2017年2月23日

更多选项

Computer randomly shutting down following RAM and Sierra upgrade

I am working on a family member's computer and recently updated it to Sierra and upgraded by swapping two 2 GB RAM modules for 4 GB modules (4 GB up to 12 GB total).

The plan is also to upgrade the HD or swap the CD drive for an SSD to make a Fusion drive. However, after the upgrade, I've been having shutdowns of the machine. It boots fine and loads Sierra. Then it will load a webpage or two and then shutdown. It has also shutdown when trying to copy files to it. I tried to copy the details of the error log, but the computer shut down after copying them and before I could post them.

Any ideas? Is it something with the HD and I should just swap it out? Is it something more fundamental like the motherboard? Any input is greatly appreciated.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

1条评论

Your systems specs: iMac 21.5" 3.6 GHz i5 (Mid-2010)

由 Dan 完成的 2017年2月23日

添加一条评论

2个答案

Dan @danj 声誉积分: 479.4千 Self employed contract worker 35 329 971 · Answer 1 · 2017-02-23T16:29:24-07:00

最有帮助的答案

Dan @danj

声誉积分: 479.4千

Self employed contract worker

35

329

971

发帖于: 2017年2月23日

更多选项

How about pulling the new RAM and just running the system with the original 4 GB is the system stable?

If the system is stable the memory you bought needs to be checked. If the system is still shutting down then there is a deeper problem. I don't see moving forward here with the upgrading of the HD or adding a SSD until you solve the stability issue.

See if you can run the built-in diagnostics. Does an error message pop up? Is the system shutting down while running diagnostics?

If you suspect the drive is failing see if you can connect this system to a second Mac using Target Disk Mode. If you can connect it up you can use the other Mac to diagnose the drive using Disk Utility.

Let us know what you find out then we can move forward on how to fix and what hardware you'll need for the HD upgrade or adding the SSD.

References:

这个答案有帮助吗？

是否

得分 3

2条评论:

Thanks Dan, great advice. I'm going to give those steps a shot tomorrow when I have a chance to look at it.

由 Aaron Peterson 完成的 2017年2月23日

Check the speed and type of the original RAM and see if what you installed is the same. You said you swapped the modules but this machine has 4 slots. Sounds like you added two 4s to the original two 2s, which would give you 12GB.

由 mayer 完成的 2017年3月13日

添加一条评论