跳转到主内容

A 12.2-inch "prosumer" tablet released in February 2014. Powered by a custom version of Android 4.4 KitKat.

40 个问题 查看全部

My tablet will not turn on after some DIY repairs

My tablet had screen flickering issues and after some research, I decided to unplug the battery and reconnect. Little did I know that the battery connector on the motherboard breaks off super easy. So then my only option was to re-solder the pins to the connectors, which I did but it still won't turn on. Some of the connectors won't accept the solder so I super-glued them, but still nothing. Any advice would be great, I called UbreakIfix and they said the base cost of repair would be over $300, which I cannot afford. Should I call Samsung? Thank you for any help.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

luke.puller , Very big mistake using the super glue for trying to make a electrical connection as it could do the opposite and become an isolator. Probably best to just take it into a good local computer/cell phone repair shop and have them take a look and estimate repair. The whole board can be purchased for $120.00 and can probably be found used for a lot less if need be. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.ebay.com/itm/OEM-Samsung-Gala...

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

luke.puller 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 101