声誉积分: 1
1
I am repairing an iPad Air 1st Gen and have found that a previous repair shop did not replace the display cable bracket shown in step 37 for this guide:
I have spent several weeks on the internet trying to find the price with now luck. I've lost 8 bids on eBay auctions trying to get an iPad for-parts. At this point, I'm looking to manufacture a facsimile of the part out of a small aluminum plate. Before I do that, I thought I would ask this community.
声誉积分: 169
5
I believe that bracket really is only there to keep the cable in place. If you are having trouble finding the part honestly I would either look for the same generation iPad in not working condition on ebay or another auction site or just drill small holed in any small piece of metal to save some money.
这个答案有帮助吗？
Good suggestion, you could use a old shield form pretty much any donor board and cut to size.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 189
6条评论
You can put like something else above it to act as a metal plate to keep it in place as well, you know that right?
由 Ben 完成的
But what could you put? I'm in the same idiotic predicament!
由 Felix Robinson 完成的
I'm perplexed at the fact no one manufactures this stupid plate anywhere...
由 Felix Robinson 完成的
I ended up fabricating one from flashing I purchased at Home Depot.
由 gwarren 完成的
What is flashing? And how'd you do it?
由 Felix Robinson 完成的
显示更多的1条评论