跳转到主内容

THINKPAD T520: Top Tier Performance and Portability.

17 个问题 查看全部

On startup it beeps and has blackscreen. help!

So when i start my computer it has a black screen and beeps, its 3 beeps followed by another 3 then followed by 1. I suppose its like a RAM issue from what ive read but i dont know if the solutions apply to my computer. Its my school comp btw so need it fixed ASAP :) (not very technical)

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
1条评论

2 beeps pause 1 beep then repeats

完成的

添加一条评论

4个答案

已选择的解决方案

Trak, you can try reseating(remove and reinsert in case of bad connection) the Ram/memory in your computer to see if that fixes the fault your having. I will post a link on how you access the Ram/memory to enable you to try this. Good luck .

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.storagereview.com/lenovo_thin...

这个答案有帮助吗?

得分 5

6条评论:

I'm having the same issue as the original post but it happens after i try and install a new trackpad. The error only happens while the trackpad is plugged in though

完成的

@oatmeal0719

Have you tried resetting the BIOS?

完成的

@aactech

I have not. I'm not entirely sure how to reset the BIOS from a black screen, or if resetting it would work before putting the trackpad back in

完成的

@oatmeal0719

Take out main battery. Discharge power by pressing On/Off button. Open case and unplug the CMOS (they call it "backup battery here). Here's the diagram from the manual.

https://support.lenovo.com/nz/en/solutio...

or download entire manual:

https://www.manualslib.com/download/4933...

完成的

I tried everything for the above comments and my screen remain black and the beeping continues. The power light flash and the "caps lock" light is on. I don't know how to fix this. Please give light

完成的

显示更多的1条评论

添加一条评论

This should be a question but https://support.lenovo.com/us/en/solutio... those are all the codes

这个答案有帮助吗?

得分 0
添加一条评论

John hall is right about the track pad wire my track pad comes off easily and is snapped off the wire. I tucked the wire into the laptop and it started touching something I’m guessing metal which caused it to short circuit I think. I just had the get out the wire.

这个答案有帮助吗?

得分 0
添加一条评论

I have a Lenovo X1 Extreme Gen 1.

Got the 0282 beep. Memory module or system board error. I tried swapping out the memory didn't work. System board was above my pay grade. I'm glad I found this thread because I disconnected the touchpad and it works now. Thanks John Hall et al.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Traktorsven 将永远感激不已
浏览统计数据:

过去 24 小时: 18

过去 7 天: 96

过去 30 天: 488

总计 64,977