跳转到主内容

Model A1419 / EMC 2806 / Late 2014 or Mid 2015. 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 late 2015 / 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (iMac17,1) All with Retina 5K displays

573 个问题 查看全部

Do the replacement screen have one or two connecting ribbons?

iMac 27" EMC 2546 A1419 (Late 2012)

Hello, Do these replacement screen

> 27-inch LCD LM270WQ1-SDF1 PN: 661-7169 <

come with one or two connecting ribbons?

Seem that there should be two to disconnect when on takes the screen apart but when I go to order a replacement screen, seem that they come with only one ribbon.

Shouldn't there be one for the LCD and one for the Digitizer?

For this iMac

iMac Intel 27" EMC 2546

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

3个答案

已选择的解决方案

OK. FYI: When you buy the Screen assembly, it only comes with one connector cable, the one shown in this correct model screen assembly on the picture Jamie uploaded. The Ribbon cable to the new Screen Display port lcd cable, 98% of the time does not come with the new Screen you order and must be purchased separately only IF, your existing one is damaged. Ask the seller if they send it with the replacement screen so you are aware if to order one!

One more detail! You will need new mounting adhesive tape to reassemble your new Screen! You must buy a new set or ask the seller if they send an adhesive kit with the screen they are selling you!

This will save you time after your get the screen, so you don't have to wait again for just the Adhesive to arrive, to complete your installation!

If the existing Display port lcd cable on your existing screen is OK, you can just swap the old screen Display port lcd cable to the new Screen Assembly!

See This interchangeable ribbon Display port lcd cable here below!

The 2nd connector, the Display Ribbon!

Hope this saves reader's time/delays, money and troubles!

这个答案有帮助吗?

得分 0
添加一条评论

OK, thanks, that is what I have been seeing.

I suppose one has to take the Display Port Cable from the old Screen and swap it to the new one!

I was afraid in ordering because there are two ribbons to be disconnected but I guess this port ribbon is disconnected at both ends and is swap-able!

Thank you Jamie, that was a quick response!

Cheers

这个答案有帮助吗?

得分 0

1条评论:

Quick but incorrect!

完成的

添加一条评论
此回答最初是针对另一个问题

There is just one ribbon as you can see in this full assembly unit below

Block Image

Good luck with your repair!

这个答案有帮助吗?

得分 -1

3条评论:

It is alway good to post links to your references. We have no way of knowing where that one came from, or if it is even the correct display.

完成的

Look carefully!

The image of the display unit you have in your answer has two connections. The black cable on the left is the backlight power lines not a ribbon cable. The ribbon cable is missing in this image, it connects to the top midpoint connector.

完成的

Thansk Dan for the Clarification!

i got it!

The Ribbon cable is the one that comes off both ends from the old screen and placed in the new screen!

Do I have this right now? About the reuse of the Ribbon cable one!

完成的

添加一条评论

添加你的答案

Carlos 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 379