Currently my 2.53 GHz logic board has a faulty ram slot. I have cleaned both slots and inserted and removed ram out of the bad one multiple times. Can I upgrade to a better Logic board? If so, what's my best option?
声誉积分: 685.3千
3.4千
1.1千
2.6千
First try backing the screws that hold the RAM slot mechanism off a quarter of a turn each and test again. Put a 4 GB in the working slot. The one that's not working will sometimes take a lessor stick.
You may be able to use this one, they are both A1278 boards, but I have not seen it listed as compatible.
这个答案有帮助吗？
I appreciate the help. I backed off the RAM slot mechanism screws a quarter turn which worked for 1-2 minutes but then the computer continued to shut down and restart. I will purchase this 2.66 GHz and hope that it works. Thanks
Ok, i did work. Try another quarter of a turn.
声誉积分: 2.2千
9
9
No point really. You could find one on eBay but it is not going to be a big improvement. Can you get the largest sized ram for just 1 slot?
这个答案有帮助吗？
声誉积分: 851
7
2
would it be possible to replace the port? someone like luis rossman could possibly replace the port
here is his site:
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 129
