跳转到主内容

Does this sound like a logicboard issue?

I'm wondering if you guys can help.

Got a G4 1.33 that will not boot.

Straight to flashing folder. When I boot using install disk (10.4) it usually gets only as far as a blue screen and hangs. I did get it as far as the utilities and

it could not see a HD to repair. Also fsck cannot detect any HD, only the Tiger install disk.So far sounds like a new HD is in order but before I pull it apart one thing bothers me. When I'm trying to boot, it will sometimes freeze on the grey screen, just stop mid boot and in target mode, if I let that run long enough it will freeze and the FW will stay stuck in the same place.

I wondering if it more likely a LB problem, what do you think, worth changing the HD?

Guidance appreciated

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
添加一条评论

1个答案

已选择的解决方案

Possible ESD hit RAM problem or seating problem. Remove the RAM and try booting from the System 9 installation disk by holding down the "C" key. If it works then it's the RAM. Reinstall RAM and try again. If it fails, replace it.

这个答案有帮助吗?

得分 2

4条评论:

Mayer, thanks for the reply. More questions I'm afraid. What is ESD? I have removed the additional 512mb stick and Airport card with same results. System 9 is OS 9 correct? That's on the Install disks that came with the Mac not the Tiger Upgrade, is that right?

完成的

Electro Static Discharge

完成的

Got it! Googled after I asked the question. Acronyms eh? PITA!!

完成的

We're even, I had to google PITA ;-)

完成的

添加一条评论

添加你的答案

Neil Sinclair 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 5

总计 624