Apple发布于2012年9月12日的第六代iPhone,维修时与前代型号一样,需要螺丝刀和撬棒。iPhone 5以多种版本销售:通讯制式有GSM/CDMA;存储容量有16/32/64G;颜色有黑/白。

3295 个问题 查看全部

Help me please! I've a weird message and the apple logo

Hello, I've a vert bad problem... My iPhone was normal (look here to see Boot Loop after little fall ) but I don't know what the repairer have done! When I start the iPhone won't starts and the Apple Logo appears with a weird message in the top ! Please, help me, how to solve this problem ? I can't restore ! , Here is a picture :

Block Image

*Sometimes(I think when I plugged the charger) it became RED SCREEN !!

Mise à jour (10/10/2015)

Hello, I've said that my iPhone when (it rests !) starts normally but when I'm in the lockscreen the digitizer don't work ! It can be the digitizer ??

Update (10/10/2015)

Hey, the repairer have said to me the digitizer is OUT OF SERVICE

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 1

评论:

Possible? Yes. Replace it and see if that is what is causing this.

添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

5个回答

已选择的解决方案

New ! The problem was the digitizer it's worked ! but I've another problem now the network is blocked in RESEARCHING ... and the iphone won't activate so I've tried to restore it with a error (47) !!

这个答案有帮助吗?

按维修分数 0
添加一条评论
最有帮助的答案

ilyesbouira, these messages are usually displayed because an individual component has gone bad. When the phone starts it runs a quick self check of all the systems, and when it encounters an error it displays error messages like this. It is common to see those on water damaged phones as well as phones with tore power flex, loose or broken compass, proximity sensor, cameras etc. you will have to take a close look at all the parts. start your phone up with a minimum of peripheries connected. I'd opt for just the display and the lightning port. Then re-evaluate by adding one component at a time.

这个答案有帮助吗?

按维修分数 2

评论:

Hello ! The iPhone has started like a charm this morning ! but the Touch Screen do not work and when the iPhone is confronted to a little choc (like put it in the table) it's powering off and I've Re-Started it with the weird message ! It can be the screen ?

Yes it can be. Anything that does not "answer" the self check during startup can cause this.

I've bring it to repairer. What is all the composants that can do this nand error ?

Any which one. Any flex, any camera, ambient light sensor, display etc.

添加一条评论

I replaced a screen on a iPhone 5 and had the same error. I pulled the screen back off and removed and reset the display cables and it went away. I have checked with my customer at least 4 times since the repair and she has not had any problems. At the worst replace the screen assembly.

If a repair technician replaced the screen and it is acting like this why isn't he fixing it under warranty?

这个答案有帮助吗?

按维修分数 1
添加一条评论

When I have seen this error in the past, it has been a bad front camera/sensor flex.

这个答案有帮助吗?

按维修分数 0
添加一条评论

This is almost certainly bad front camera flex from a replacement screen that came with all the small components pre-installed. That is very common. It is always better to have your installer transfer your original front cam/proximity sensor instead of using third party parts.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

ilyesbouira 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 340