跳转到主内容

Fourth generation of iPad, released November 2, 2012, available in Wi-Fi, CDMA, and GSM models with 16, 32, or 64 GB of storage.

430 个问题 查看全部

Touchscreen not working after glass replacement

Replaced JUST the glass on the iPad 4, kept the original apple LCD which was fine, used a hairdryer quite a bit to remove the adhesive, and also to blow all the dust off. Put it all back together, the screen powers up and everything, however it's not responding when i touch, or swipe the screen. I've removed all the plastic films and protectors, taken the cable out and put it back in 4 times, any suggestions? It's for a customer so is urgent that the problem is resolved, would the heat have killed the sensitivity in the actual LCD?

Thanks

Jacob

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

3个回答

已选择的解决方案

Try a new digitizer. This is a not uncommon problem with cheap digitizers. Also, since you originally thought the touch was on the LCD (it's not), double check the connection of the digitizer (front glass). And if you've been touching the LCD, CAREFULLY clean it using a soft cloth - NOT paper towel. I recommend a screen cleaner like AppleJuce Cleaning Kit

这个答案有帮助吗?

按维修分数 0
添加一条评论
最有帮助的答案

Have you tried a different digitizer (glass)?

这个答案有帮助吗?

按维修分数 1

评论:

No, it's the LCD that won't respond to the touchscreen, when I touch the LCD with my finger without the glass too, it still doesn't respond.

Jacob

Sounds like you need to try a new glass digitizer. The glass senses your touch. Not the lcd.

添加一条评论

Sounds like you need to try a new glass digitizer. The glass senses your touch. Not the lcd.

这个答案有帮助吗?

按维修分数 0

评论:

They look fine to me.. ?

Your flaps still flip up and down fine?

添加一条评论

添加你的答案

jacobrsmith 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 135