Model A1225 / Early 2009 / 2.66, 2.93, or 3.06 GHz Core 2 Duo processor

172 个问题 查看全部

How to identify iMac hard drive model

Hello. My 24'' iMac's hard disk has gone. I started with the OS disc and through the system profile tried to find out the exact brand and model hd to replace it. But I couldn't determine it. Please, help me.

Here are some screenshots:

Block Image

Block Image

Block Image

Thanks in advance for your help.

已回答! View the answer 我也有这个问题


按维修分数 0

所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!



与 #ImAGenius 分享您的维修故事


与 #ImAGenius 分享您的维修故事



Your system came with a Seagate 1 TB HD. As you can see the drive within the system profile, are you sure the drive its self is bad? It could be something with the formatting or the OS install that's bad.

If you haven't already made a backup of you're data I would try doing that first. Using your system recovery disk to boot up your system you could try deleting the partition/s and re-install the OS and your apps.

If you want to upgrade your HD here is the IFIXIT guide to take out your current HD: iMac Intel 24" EMC 2267 Hard Drive Replacement.

As to what to use I would recommend going with one of the newer SSHD hybrid drives. You will need to make sure the drive you get is able to run at SATA II (3.0 Gb/s) check the specs sheet of the drive. You can't use the newer SATA III (6.0 Gb/s) drives unless it is able to auto set its SATA speed to SATA II. I would recommend going with a Seagate Desktop SSHD. There are others WD makes one as well but this is the only one I know of that runs at SATA II.


按维修分数 3


Dan, wasn't there a recall on the 1TB Seagate drives?

Yes, for the 27" model. This one should be OK, 24" model. It appears Apple has ended to recall for the 27" model, my link is not working. In the morning I'll ask my guy about it.

Thank you for your help. I have already repaired, formatted, checked the disc and restored my data from Time Machine. But the disc past away. I even started in verbose mode and could see the problem was in the disc before format. After that it worked well one day, and since then shows the first picture in my previous post.

Now, with your help I know I have to look for a 3,5'' Sata II (3.0 Gb/s). I'm really bad with hardware :S.

Thank you again!



fquero 将永远感激不已

过去的24小时: 0

过去的7天: 2

过去的30天: 14

总计 921