Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1959 个问题 查看全部

How to remove and reattach the glued parts from the rear panel?

On the following instruction to replace 3GS rear panel:

iPhone 3GS Rear Panel Replacement

It ends at the back cover with all the glued part still remains, including the silver front bezel. How can I remove them nicely and reattached to a new replacement rear cover?

What tools do I need?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

1个答案

已选择的解决方案

Use a heat gun, or even a blow dryer to heat up the cables and other parts, then with pry bars you should be able to lift them up (an iSesamo) will be better too but becareful not to rip the cables. They are all glued with adhesive and glue. The first three Tools on this page should help you out.

这个答案有帮助吗?

按维修分数 2

评论:

What type of glue can I use to re-attach it to the replacement panel?

I have done it with superglue before (maybe somebody else can chime in if some other type is better) just use a little drop for the cables. For the frame go around it with the superglue but don't put too much as you don't want it to mess up your new rear panel.

I simply use double tape. I keep two kinds in stock:

Clear+thick with strong hold (around 10mm width) and

Black+thin with medium hold (around 3mm width).

添加一条评论

添加你的答案

cybie 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 91