DC-in board from G4 to replace a broken G3 DC-in board.

Question

iBook G3 12"

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117 个问题查看全部

Ephraim @ephraim47076

声誉积分: 25

2

发帖于: 2012年10月16日

更多选项

DC-in board from G4 to replace a broken G3 DC-in board.

Hello!

A broken DC-in board from an ibook G3 12" 800Mhz needs replacement.

I have a spare DC-in board from an ibook G4 14".

The logic board connectors are not compatible.

Can I strip the wires to transplant the G3 board connector to the G4 Dc-in board and use it as a replacement?

I know that I still have to figure how to secure the G4 Dc-in board inside the G3 since the screws are not located in the same configuration and the "tip module" is inverted. I'm pretty sure I can figure out that one, my concern is with the voltage output to the CPU.

Will the G4 14" Dc-in board output fry the G3 12"?

Thanks!

PS: Soldering is not an option for me, yet...will learn how to soon!

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

1条评论

Sooo...nada so far.

It's okay, I'll "MacGyver" this one and post the outcome here.

The plan is to transplant as suggested in the original post above.

Stay tuned!

TBC...

由 Ephraim 完成的 2012年10月22日

添加一条评论

1个答案

已选择的解决方案

mayer @mayer

声誉积分: 685.3千

MacHale Enterprises

3.4千

1.1千

2.6千

发帖于: 2012年10月22日

更多选项

Are you really going to risk destroying your machine by MacGyvering a $1.00 part? http://www.gainsaver.com/Catalog/Detail....

这个答案有帮助吗？

是否

得分 3

2条评论:

Hi mayer. It was one of those things that I wanted to do because it is unknown if it could work...I wanted to boldly go where no one has gone befo...anyway, DO NOT DO IT! The cables are way too thin to strip and reconnect.

BTW thanks for the gainsaver.com link, I might get it if the logic board connector is included.

Cheers!

由 Ephraim 完成的 2012年10月23日

UPDATE Hi mayer, I contacted gainsaver.com and much to my surprise, and disappointment, they sell the dc in board without the logic board connector ribbon, thus the $1 price. Regardless, thank you for the tip. Cheers!

由 Ephraim 完成的 2012年10月24日

添加一条评论

Sooo...nada so far.

It's okay, I'll "MacGyver" this one and post the outcome here.

The plan is to transplant as suggested in the original post above.

Stay tuned!

TBC... — Ephraim
Hi mayer. It was one of those things that I wanted to do because it is unknown if it could work...I wanted to boldly go where no one has gone befo...anyway, DO NOT DO IT! The cables are way too thin to strip and reconnect.

BTW thanks for the gainsaver.com link, I might get it if the logic board connector is included.

Cheers! — Ephraim
UPDATE Hi mayer, I contacted gainsaver.com and much to my surprise, and disappointment, they sell the dc in board without the logic board connector ribbon, thus the $1 price. Regardless, thank you for the tip. Cheers! — Ephraim

iBook G3 12"

DC-in board from G4 to replace a broken G3 DC-in board.

1个答案

添加你的答案