Back Panel
11个答案 47 分 |
Reboot loop! Factory reset didn't work! |
11个答案 25 分 |
Why is my battery not charging? |
2个答案 6 分 |
phone stuck on andriod logo |
3个答案 5 分 |
SIM reader problem/schematic needed |
工具
下列是修复此设备所需要的常见工具,但您可能不需要某些工具。
Troubleshooting
Track down a number of hardware problems using the Huawei Ascend P6-U06 troubleshooting guide.
Background
The Huawei Ascend P6-U06 was released June 18, 2013 in Europe, Australia, and China.
The phone comes in a black, white, or pink finish. There is a pin on the bottom left of the phone covering the headphone jack, which is used for opening the dual SIM cards. The power and volume buttons are located along the right side of the phone, and the phone has both front and rear facing cameras.
Compared to the Huawei Ascend P7, the P6 is smaller and lighter. The P6 has the headphone jack on the bottom left and the MicroUSB port on the top, while the P7 has the headphone jack on the top and the MicroUSB port on the bottom.
Identification
The phone's model number can be found on the back of the phone near the bottom. The model number can also be found by going into Settings>All >About Phone>Model Number.
Specifications
- Weight: 4.23 oz (120 g)
- Dimensions: 5.22 in x 2.58 in x .24 in (13.27 cm x 6.55 cm x 0.62 cm)
- Display: 4.7 in (11.93 cm)
- Screen: Gorilla Glass
- OS: Android OS v4.2.2 (Jelly Bean)
- Interface: Huawei's Emotion UI 1.6
- Memory: 16 GB
- RAM: 2 GB
- Front camera: 5 MP
- Rear camera: 8 MP, autofocus, and LED flash