跳转到主内容

这个拆解是不是维修指南。 要维修你的的Lenovo ThinkPad 410,请使用我们的维修手册

  1. 这个步骤还没有翻译 帮忙翻译一下

    • Unlatch and remove battery

  2. 这个步骤还没有翻译 帮忙翻译一下

    • Open Acess panel

  3. 这个步骤还没有翻译 帮忙翻译一下

    • Remove Hard drive

  4. 这个步骤还没有翻译 帮忙翻译一下

    • Remove wirless WAN

  5. 这个步骤还没有翻译 帮忙翻译一下

    • Remove DIMM from back

  6. 这个步骤还没有翻译 帮忙翻译一下

    • Remove Keyboard retaing Screw from bottom of system

    • Turn the system over and open the cover. Push the keyboard toward the back and lift it up. Slide it forward to rest it on the palm rest. Disconnect the ribbon cable.

  7. 这个步骤还没有翻译 帮忙翻译一下

    • Remove BIOS battery

  8. 这个步骤还没有翻译 帮忙翻译一下

    • Disconnect the two antenna leads from the Wireless WAN card. Remove the two retaining screws. Rotate the card up and pull it out of the slot.

    • Remeber which lead goes where Prior to removing it . Grey is usually MAIN , black AUX

  9. 这个步骤还没有翻译 帮忙翻译一下

    • Remove 14 retaining screws from back

    • The first 9 are required for bezel and touchpad removal .

    • M2 × 14 mm, wafer-head, nylon-coated (6)

    • M2 × 3 mm, wafer-head, nylon-coated (3)

    • The remaining need to be removed for base cover removal

    • M2 × 5 mm, wafer-head, nylon-coated (4)

    • M2 × 10 mm, wafer-head, nylon-coated (1)

    • Note: The FPC cable is attached on the underside of the keyboard bezel assembly. In some models, the Bluetooth daughter card is also attached on the underside of the keyboard bezel assembly.

  10. 这个步骤还没有翻译 帮忙翻译一下

    • Turn system over , open , remove 4 retaining screws and the work form one side , using spudger to remove chasis bezel

    • M2 × 3 mm, wafer-head, nylon-coated (4)

  11. 这个步骤还没有翻译 帮忙翻译一下

    • Remove 4 retaining screws

    • M2 × 3 mm, wafer-head, nylon-coated (4)

  12. 这个步骤还没有翻译 帮忙翻译一下

    • Remove the two retaining screws on the bottom of the system.

    • M2.5 × 6 mm, wafer-head, nylon-coated (2)

    • Turn the system over and open the cover.

    • Unroute all the wires.

    • Remove the retaining screws.

    • M2.5 × 6 mm, wafer-head, nylon-coated (2)

    • Carefully lift the LCD panel up and out of the chass

kevinleroy

于2012年08月13日注册

338 信誉积分

撰写一个指南

团队

Master Techs Master Techs 的会员

Community

300 名成员

创作了1,006篇指南

5条评论

Uhm, sorry, what about the photos? I don't see any...

JoeMuc2014 - 回复

Still not seeing any photos accompanying the steps listed in the teardown.

Jason Landers - 回复

well. if get short out inside of USB or network line>> that has been stopping the software lunched.

mohammed - 回复

we need teardown of T410

mohammed - 回复

The video shows a teardown of the T410s. It is a lot different from the T410.

Robert Oschmann - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 6

过去的30天: 36

总计 9,091