Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南

英语
中文

正翻译步骤 2

Step 2
Peel back the tape covering the top of the keyboard ribbon cable connector. Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Peel back the tape covering the top of the keyboard ribbon cable connector.

  • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use the flat end of a spudger to push the keyboard ribbon cable out of its socket.

剥开覆盖键盘带状电缆连接器顶部的胶带。

使用挑线器的扁平端将键盘带状电缆ZIF插座上的固定挡板翻起来。

确保你在铰链固定盖上撬动,而不是插座本身。

使用挑线器的扁平端将键盘带状电缆从插座中推出。

在开源创作共享许可协议下,你的投稿已被许可