跳转到主内容
英语
中文

正翻译步骤 17

步骤 17
We loosen a pair of Phillips screws to access the Lightning connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind. Luckily, the Lightning port is modular—so if you wear your port out, all you have to do is utterly destroy the case to replace that component. The logic board is secured with a lot of sticky tape.
  • We loosen a pair of Phillips screws to access the Lightning connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind.

  • Luckily, the Lightning port is modular—so if you wear your port out, all you have to do is utterly destroy the case to replace that component.

  • The logic board is secured with a lot of sticky tape.

我们松开一组十字螺丝就可以拆下 Lightning 连接器。从主板的背面拔出它的压接连接器,几秒钟后,它就很轻松地从这个塑料壳中分离。

庆幸的是,Lightning 接口是标准组件,如果坏了的话你也可以进行更换,不过你要先拆开这个充电盒。

主板被大量的胶带固定着。

在开源创作共享许可协议下,你的投稿已被许可