修复你的物品 社区 商店

iPhone4s 电池更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的20本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
iPhone 4S Battery Replacement: 步骤 0 中的图像 1，2 iPhone 4S Battery Replacement: 步骤 0 中的图像 2，2

  • Insert the edge of a plastic opening tool between the battery and the outer case near the bottom of the iPhone.

  • Run the plastic opening tool along the right edge of the battery and pry up at several points to completely separate it from the adhesive securing it to the outer case.

  • If the adhesive is too strong, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.

  • Wait about one minute for the alcohol solution to weaken the adhesive.

  • Use the flat end of a plastic opening tool to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

将塑料开启工具的边缘插入电池与手机中间的缝隙，将电池取出。

沿着电池的右侧边缘使用塑料开口工具，从不同的位置上撬起，将电池完全与后盖的残胶断开分离.

如果粘合剂过于强力，那么可以向电池边缘下滴几滴高浓度（90%以上）的酒精。

等待一分钟左右，让酒精削弱胶粘力。

用塑料开启工具平的一端小心的将电池抬起。

切勿尝试用蛮力将电池撬起！如有必要，可以多滴几滴酒精。绝不要用你的工具使电池变形或将其刺破！

如有酒精残留在手机内，那么请小心将其擦除并在安装新电池之前使其自然风干。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。