iPad 2 CDMA Headphone Jack Assembly Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.
Be sure you are prying up on the hinged retaining flap, not the socket itself.
Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.
Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.