跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
中文

正翻译步骤 1

步骤 1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.6 mm Pentalobe P2 screws next to the dock connector.

  • Be sure the driver is well-seated when removing Pentalobe screws—they are easy to strip.

  • During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our Liberation Kit provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.

拆机前,请先关机。

拆卸掉两颗3.6mm 五角 P2防撬螺丝。

重新组装的时候,我们建议你用菲利普螺丝刀来更换5号专用螺丝。我们的拆解套装为你提供用菲利普斯螺丝刀更换五角螺丝。

5号螺丝刀只能用一次,不用上太紧,以免滑丝。

[* icon_caution] Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
[* black] Power off your iPhone before beginning disassembly.
[* red] Remove the two 3.6 mm Pentalobe P2 screws next to the dock connector.
[* icon_note] Be sure the driver is well-seated when removing Pentalobe screws—they are easy to strip.
[* icon_reminder] During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our [product|IF182-019|Liberation Kit] provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.

在开源创作共享许可协议下,你的投稿已被许可