跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Turn the circuit board over and identify which solder connection you will desolder. The solder connections shown in red hold the right antenna port in place. There is one more attachment for this antenna on the other side of the board.
  • Turn the circuit board over and identify which solder connection you will desolder.

  • The solder connections shown in red hold the right antenna port in place. There is one more attachment for this antenna on the other side of the board.

  • The solder connections shown in blue hold the left antenna port in place. Desolder these 4 points to remove the antenna port.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可