跳转到主内容

分离屏幕

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的25本指南

英语
中文

正翻译步骤 2

步骤 2
Opening Procedure: 步骤 0 中的图像 1,3 Opening Procedure: 步骤 0 中的图像 2,3 Opening Procedure: 步骤 0 中的图像 3,3
  • Apply a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

沿加热位置, 将吸盘放在其正中间的位置。

确保吸盘已经完全贴合在屏幕没有空洞和气泡。

一只手将 iPad 固定在桌面上, 另一只手轻轻将吸盘提起来, 让屏幕和外壳留一条小缝。

只需要分离一条小缝,能够让插入一个小撬片就够了,过分用力会破坏你的屏幕。

-[* black] Carefully place a suction cup halfway up the heated side.
+[* black] Apply a suction cup halfway up the heated side.
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
-[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
-[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.
+[* black] While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.
+ [* icon_note] Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.
+ [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利