跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的39指南

英语
法语

正翻译步骤 1

步骤 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Retirez les cinq vis cruciformes suivantes, qui maintiennent le support inférieur en place :

Quatre vis de 3,2 mm

Une vis de 1,7 mm

Vous devrez peut-être décoller l'adhésif de l'écran sur le bord inférieur du boîtier de l'iMac pour accéder aux vis.

[* black] Remove the following five Phillips screws holding the lower support bracket in place:
[* red] Four 3.2 mm screws
[* orange] One 1.7 mm screw
[* icon_note] On at least some EMC 2544 machines, all five screws are the same size.
[* icon_note] You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

在开源创作共享许可协议下,你的投稿已被许可