跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的39指南

英语
德语

正翻译步骤 1

步骤 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Entferne folgende fünf Kreuzschlitzschrauben, welche die untere Displayhalterung befestigen:

Vier 3,2 mm Schrauben

Eine 1,7 mm Schraube

Du musst eventuell die Verklebung am unteren Rand der Gehäuseöffnung ablösen, um an alle Schrauben zu gelangen.

[* black] Remove the following five Phillips screws holding the lower support bracket in place:
[* red] Four 3.2 mm screws
[* orange] One 1.7 mm screw
[* icon_note] On at least some EMC 2544 machines, all five screws are the same size.
[* icon_note] You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

在开源创作共享许可协议下,你的投稿已被许可