iPad 3 4G版前面板的移除

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南。

英语

中文

正翻译步骤 8

步骤 8

While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.
Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go.
The adhesive is very strong, and some serious force may be required. Work carefully.
If you can see the tip of the opening pick underneath the front glass, pull the pick out just a little bit. While using the opening pick this deep won't damage anything, it may get adhesive residue all over the LCD.