跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Remove two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running. Many recent Macs may be able to use OS X Internet Recovery.

从硬盘驱动器两侧卸下两个T6 Torx螺丝(总共四颗螺丝)

如果你要更换硬盘,则需要将这些螺丝转移到新的硬盘驱动器上。

如果需要的话,撕下旧的硬盘驱动器的拉条,并将其转移到新驱动器的一侧。

如果你正在安装新的硬盘驱动器,我们有一个OS X安装指南来启动和运行。许多最近出产的Mac 能够使用OS X 因特网恢复

在开源创作共享许可协议下,你的投稿已被许可