跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Submerge the logic board in isopropyl alcohol, and allow it to soak long enough to loosen hardened residue, and to displace any remaining water or other liquid. Use a soft brush to remove visible corrosion and residue. Residue from motherboard left in isopropyl alcohol container.
Cleaning the logic board
  • Submerge the logic board in isopropyl alcohol, and allow it to soak long enough to loosen hardened residue, and to displace any remaining water or other liquid. Use a soft brush to remove visible corrosion and residue.

  • Residue from motherboard left in isopropyl alcohol container.

  • Clean all flex ends, battery contacts, connectors, chips, and fuses on motherboard with a soft brush.

  • Repeat cleaning if necessary, or if traces of residue are still visible.

  • Allow the logic board or other parts to dry completely before reassembly.

将主板浸泡在异丙醇(医用酒精)中,并使其浸透足够长的时间以使硬化的残渣松散开,排掉任何残留的液体。使用软刷子清除掉可见的腐蚀物及残渣。

容器中从主板上剥落到异丙醇(医用酒精)中的残渣。

用软刷子清理所有主板上的线缆末端,电池触点,连接器,芯片以及保险。

如有必要或者依然看的到有残渣可以再次清理。

务必使主板及其他部件完全晾干后再进行重新安装。

在开源创作共享许可协议下,你的投稿已被许可