注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南。
正翻译步骤 6
步骤 6
Disconnect cable 3
-
Use a spudger to flip up the white plastic tab holding the ribbon cable "3" in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
-
Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.
+ | [title] Disconnect cable 3 |
---|---|
[* icon_caution] Please note: You may find on some non-American (Chinese, European) versions of the 3G that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screen until it is removed. When you assemble it, you would apply pressure to the ribbon to insert it back into the ribbon "socket." | |
[* icon_note] Some iPhones may have the connector colors reversed (black plastic tab, white connector) for connector "3". Make sure you're flipping up the tab properly, otherwise you may damage the connector. | |
[* yellow] Use a spudger to flip up the white plastic tab holding the ribbon cable "3" in place. The white tab will rotate up 90 degrees, releasing the ribbon cable. | |
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone. |
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。