修复你的物品 社区 商店

iPhone 3G 电池更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 10

步骤 10
iPhone 3G Battery Replacement, Disconnect cables 6 and 7: 步骤 0 中的图像 1，2 iPhone 3G Battery Replacement, Disconnect cables 6 and 7: 步骤 0 中的图像 2，2
Disconnect cables 6 and 7

  • Use a spudger to disconnect the ribbon cable labeled "6."

  • If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."

  • Be certain that the connectors on the ribbon cables are perfectly aligned with the sockets on the mother board before applying pressure. This may require a magnifying glass or jewelers' loupe.

在此插入翻译

使用spudger断开的带状电缆标记为“6”。

如果你有一个iPhone 3GS，参照第二图片和使用撬棒断开“7排线。”

确保在施加压力之前，带状电缆上的连接器与母板上的插座完全一致。这可能需要一个放大镜或珠宝放大镜。

+[title] Disconnect cables 6 and 7
[* yellow] Use a spudger to disconnect the ribbon cable labeled "6."
[* icon_note] If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."
[* icon_note] Be certain that the connectors on the ribbon cables are perfectly aligned with the sockets on the mother board before applying pressure. This may require a magnifying glass or jewelers' loupe.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。