iPhone 3G Battery Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南。

英语

荷兰语

正翻译步骤 13

步骤 13

Remove the logic board

Use a spudger to gently pry up the end of the logic board closest to the dock connector.
There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Be VERY careful this does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.
If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.