跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
After rooting around the battery compartment, we punch through the sticker on  the back to find three T6 Torx screws. With the rear housing removed, we get our first look inside the controller as the glossy black exterior gives way to the mossy green PCB interior.
  • After rooting around the battery compartment, we punch through the sticker on the back to find three T6 Torx screws.

  • With the rear housing removed, we get our first look inside the controller as the glossy black exterior gives way to the mossy green PCB interior.

  • So far we've only used our hands and a screwdriver, but we're already in—this controller's already scoring points in our book.

我们捅开手柄背面电池盒附近的贴纸,将能发现三个T6 Torx螺丝。

拆下光滑的黑色后壳之后,我们首先能看到的是绿色的PCB。

到目前为止,我们只用了手和一把螺丝刀就拆开了手柄。这在我们心目中已经打了高分。

在开源创作共享许可协议下,你的投稿已被许可