iPad Air 2 Wi-Fi Home Button Assembly Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

韩语

正翻译步骤 2

步骤 2

Remove the Home Button bracket and peel up the tape connected to it.
During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it
Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.