修复你的物品 社区 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point. Use the hot iOpener to cover half of the right-most battery cells.

  • If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

  • Use the hot iOpener to cover half of the right-most battery cells.

  • After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

如果您没有粘合胶去除剂，您将使用热的热的iOpener 来加温和软化将电池固定到上壳上的一部分粘合剂，然后在那时仔细撬动。

使用热的iOpener来覆盖一半的最右边的电池

大约一分钟后，重新加热iOpener并将其移动到覆盖最右侧电池的另一半。

在开源创作共享许可协议下，你的投稿已被许可。