注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的13本指南。
正翻译步骤 2
-
Firmly grasp the edge of the midframe assembly.
-
Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone.
-
While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port.
-
Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe.
-
To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack.
-
You may need to heat and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult.
+ | [* icon_caution] Before you perform this step, make sure you've ejected the SIM card tray. |
---|---|
[* black] Firmly grasp the edge of the midframe assembly. | |
[* black] Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone. | |
+ | [* black] While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port. |
+ | [* black] Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe. |
+ | [* icon_caution] Be careful not to accidentally insert the opening pick between the glass and display. |
+ | [* black] To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack. |
+ | [* black] You may need to [guide|25705|heat|new_window=true] and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult. |
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。