修复你的物品 社区 商店

Vervanging frontplaat voor Xbox One draadloze controller

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

返回指南
英语
荷兰语
上一步 下一步

正翻译步骤 3

步骤 3
Xbox One Wireless Controller Faceplate Replacement, Screws: 步骤 0 中的图像 1，2 Xbox One Wireless Controller Faceplate Replacement, Screws: 步骤 0 中的图像 2，2
Screws

  • There is a hidden screw located in the middle of the controller behind the label.

  • Use a screwdriver and punch a hole directly in the center of the label.

  • You may also lift the label if you do not want to puncture it.

  • Remove the five 10mm screws located on the back of the controller using the TR8 Security Torx Screwdriver.

Schroeven

Er is een verborgen schroef in het midden van de controller achter het label.

Gebruik een schroevendraaier en maak een gaatje direct in het midden van het label.

U kunt het etiket ook optillen als u het niet wilt doorboren.

Verwijder de vijf 10 mm-schroeven aan de achterkant van de controller met behulp van de T8 Security Torx-schroevendraaier.

[title] Screws
[* icon_note] There is a hidden screw located in the middle of the controller behind the label.
[* red] Use a screwdriver and punch a hole directly in the center of the label.
[* icon_note] You may also lift the label if you do not want to puncture it.
-[* orange] Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.
+[* orange] Remove the five 10mm screws located on the back of the controller using the TR8 ***Security*** Torx Screwdriver.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。